Alexapure Pro Review: Is This Water Filter Worth It?

We may earn money or products from the companies mentioned in this post.

This Alexapure Pro review takes a closer look at one of the better-known stainless-steel gravity water filtration systems, including how it works, filter capacity, contaminant-reduction claims, setup, maintenance, pros and cons, and whether it’s worth buying.

The Alexapure Pro is designed for people who want countertop drinking-water filtration without electricity, permanent plumbing modifications or a connection to a pressurized water line.

Its stainless-steel gravity-fed design also makes it appealing for emergency preparedness, off-grid situations and households that want a relatively simple way to filter drinking water.

Alexapure Pro Review: Quick Verdict

The Alexapure Pro is worth considering if you specifically want a high-capacity gravity water filtration system that doesn’t require electricity or plumbing.

Its stainless-steel construction, approximately 2.25-gallon chamber capacity and ability to operate with additional filter elements give it more flexibility than a typical water-filter pitcher.

However, buyers should carefully distinguish between specific contaminant-reduction test results and broad claims that a filter makes virtually any water source safe to drink.

Best for: Households looking for countertop gravity filtration, emergency preparedness or a non-permanent drinking-water filtration system.

Less suitable for: People who want instant filtered water, have very limited counter space or need treatment for a specific contaminant that isn’t supported by current performance testing.

What Is the Alexapure Pro?

The Alexapure Pro is a stainless-steel gravity water filtration system consisting primarily of an upper chamber, lower chamber and replaceable gravity filter.

Untreated water is poured into the upper chamber. Gravity pulls the water through the filter element, and the filtered water collects in the lower chamber where it can be dispensed through the spigot.

Unlike an under-sink reverse osmosis system or faucet-mounted filter, the Alexapure Pro doesn’t require a plumbing connection.

It also doesn’t require electricity, batteries or water pressure to operate.

That simplicity is one of the primary reasons gravity systems remain popular for everyday countertop filtration and emergency preparedness.

Alexapure Pro Gravity Water Filter

Alexapure Pro review

Check Alexapure Pro Price on Amazon

How Does the Alexapure Pro Work?

The Alexapure Pro relies on gravity rather than water pressure to move water through its filtration media.

The basic process is straightforward:

  1. Fill the upper stainless-steel chamber with water.
  2. Gravity pulls the water through the filter element.
  3. Filtered water collects in the lower chamber.
  4. Use the stainless-steel spigot to dispense the filtered water.

Because gravity supplies the pressure, filtration is naturally slower than many pressurized under-sink or faucet-mounted systems.

That’s not necessarily a disadvantage. Gravity filtration is designed around storage capacity rather than instant filtration.

You fill the upper chamber and allow the system to produce filtered water over time.

Alexapure Pro Capacity

The Alexapure Pro uses stainless-steel upper and lower chambers with an approximate capacity of 2.25 gallons each.

The lower chamber stores the filtered water, making the system considerably larger than a typical water-filter pitcher.

That can be helpful for households that consume substantial amounts of drinking water, but the physical size should also be considered before buying.

You’ll need enough counter, cart or stand space for the assembled system while still leaving enough clearance to operate the spigot.

What Does the Alexapure Pro Filter?

Alexapure has promoted the Pro based on its ability to reduce a broad range of contaminants.

However, contaminant-reduction claims deserve careful attention because one reduction percentage shouldn’t automatically be applied to every contaminant a filter has been tested against.

Performance can vary significantly depending on the contaminant, concentration, test conditions and amount of water processed.

When evaluating the Alexapure Pro for a specific water-quality concern, check the manufacturer’s current laboratory performance data for that individual contaminant rather than relying on a general statement such as “removes 99.9999% of contaminants.”

This distinction is especially important when you’re concerned about contaminants with potential health implications.

Does the Alexapure Pro Remove Chlorine?

Chlorine is commonly used by municipal water utilities as a disinfectant.

While disinfection is important for public water safety, some consumers dislike the taste or odor associated with residual chlorine in tap water.

The Alexapure Pro has been marketed for chlorine reduction along with other contaminants.

If chlorine reduction is your primary reason for purchasing the system, review the current performance documentation for the replacement filter you’re considering.

Does the Alexapure Pro Remove Fluoride?

Fluoride is another contaminant for which Alexapure has published reduction claims.

The older version of this article stated that the Alexapure Pro removes 99.9999% of fluoride. That’s too broad a statement to repeat without tying the percentage to the specific test conditions and current manufacturer documentation.

If fluoride reduction is important to you, check Alexapure’s latest laboratory results for fluoride specifically.

This is preferable to assuming that the highest reduction percentage associated with the product applies equally to every substance tested.

Does the Alexapure Pro Remove Lead?

The Alexapure Pro has also been promoted for lead reduction.

Lead is a particularly important contaminant because exposure can present serious health concerns.

If you know or suspect that lead is present in your drinking water, consider having the water tested and verify that any filtration system you purchase has appropriate performance data for lead reduction under conditions relevant to your water.

A general gravity-filter marketing claim shouldn’t replace contaminant-specific testing when you’re addressing a known water-quality problem.

What About Bacteria and Viruses?

Microbiological claims require even greater care.

The Alexapure Pro has been marketed with reduction claims involving certain microorganisms, but that doesn’t mean untreated water from every lake, stream, well or other source should automatically be considered safe after running through the system.

Water from an unknown source can contain microorganisms, chemicals, toxins and other hazards that vary dramatically by location and conditions.

For emergency use, follow appropriate public-health guidance and the manufacturer’s current instructions for the water source you’re treating.

A gravity filter shouldn’t be treated as permission to drink from an unknown water source without understanding the risks involved.

Alexapure Pro Filter Life

One of the Alexapure Pro’s most attractive specifications is its advertised filter capacity.

A single Alexapure Pro filter has been marketed with a capacity of up to approximately 5,000 gallons.

That number is best treated as a maximum capacity rather than a promise that every household will receive exactly 5,000 gallons of optimal filtration.

Actual filter life can depend on factors such as:

  • Incoming water quality
  • Sediment levels
  • Contaminant concentrations
  • Daily water consumption
  • Cleaning and maintenance
  • Flow-rate changes over time

Challenging source water may reduce useful filter life compared with relatively clean municipal tap water.

Can You Add More Filters to the Alexapure Pro?

The Alexapure Pro is designed to accommodate additional filter elements, with configurations supporting up to four filters.

Adding filters can increase the rate at which water moves from the upper chamber into the lower chamber.

That can be useful for larger households or people who consume significant amounts of filtered water each day.

However, additional filters also increase the upfront and eventual replacement cost.

A household with moderate drinking-water needs may find that the standard configuration provides sufficient capacity without immediately adding more filters.

Alexapure Pro Components

A typical Alexapure Pro setup includes:

  • Upper stainless-steel chamber
  • Lower stainless-steel chamber
  • Alexapure gravity filter element
  • Stainless-steel lid
  • Spigot assembly
  • Rubber plugs for unused filter openings
  • Base ring
  • Required assembly hardware

Always check the current product listing before purchasing because included accessories and packaging can change.

Alexapure Pro Setup

One of the advantages of the Alexapure Pro is that setup doesn’t involve modifying household plumbing.

The general process includes:

  1. Wash and prepare the components according to the manufacturer’s instructions.
  2. Install the spigot in the lower chamber.
  3. Install the filter element in the upper chamber.
  4. Seal unused filter openings with the supplied plugs.
  5. Place the upper chamber onto the lower chamber.
  6. Follow Alexapure’s current preparation and flushing instructions.
  7. Fill the upper chamber and allow gravity filtration to begin.

Follow the instructions supplied with your current filter rather than relying solely on older setup guides because product recommendations can change.

Does the Alexapure Pro Filter Need Priming?

The Alexapure Pro has historically been marketed as not requiring the type of manual priming associated with some other gravity filter elements.

That simplifies initial setup.

You should still follow the current preparation, flushing and installation instructions included with the filter before drinking the filtered water.

Alexapure Pro Flow Rate

Gravity systems naturally filter water more slowly than pressurized filtration systems.

The water has to move through the filter using gravity alone, so you shouldn’t expect the instant flow associated with an under-sink filter connected directly to household water pressure.

Flow rate can also change as the filter accumulates material over time.

If filtration becomes unusually slow, follow the manufacturer’s cleaning and maintenance instructions before assuming the filter needs immediate replacement.

Alexapure Pro Maintenance

Maintenance is relatively straightforward but shouldn’t be ignored.

The stainless-steel chambers should be cleaned periodically according to Alexapure’s instructions, and the filter element should be maintained according to the manufacturer’s recommendations.

Pay particular attention to the spigot and lower chamber because those components contact already-filtered water.

Good hygiene helps prevent the clean-water chamber itself from becoming a source of contamination.

You should also monitor filtration speed and replace the filter when it reaches the end of its useful service life.

Does the Alexapure Pro Require Electricity?

No. The Alexapure Pro operates entirely through gravity.

There are no pumps, batteries or electrical connections required for normal filtration.

This makes it particularly useful in situations where electrical power may be unavailable, including power outages and certain emergency-preparedness scenarios.

It’s also convenient for renters because installation doesn’t require modifying the home’s plumbing.

Alexapure Pro for Emergency Preparedness

The combination of gravity operation, water-storage capacity and lack of electricity requirements makes the Alexapure Pro appealing for emergency preparedness.

However, it’s important to separate emergency preparedness from the idea that the system can automatically make any available water source safe.

Emergency water can be affected by biological contamination, chemicals, flooding, fuel, sewage and other hazards.

A filtration system should be part of a broader emergency-water plan rather than the only safeguard.

Keeping a supply of stored potable water remains an important part of emergency preparedness.

Alexapure Pro vs. Water Filter Pitcher

The Alexapure Pro offers substantially more storage capacity than most water-filter pitchers.

It can make sense for households that find themselves constantly refilling smaller pitchers.

A pitcher, however, has several advantages of its own:

  • Lower upfront cost
  • Smaller footprint
  • Easier refrigerator storage
  • Simple cartridge replacement

The Alexapure Pro is better suited to someone who values larger capacity and gravity operation enough to dedicate permanent counter or stand space to the system.

Alexapure Pro vs. Under-Sink Water Filter

An under-sink system and the Alexapure Pro solve the convenience problem differently.

Under-sink systems typically use household water pressure and can provide filtered water immediately through a dedicated or existing faucet.

The Alexapure Pro requires no plumbing connection but filters more slowly and requires manual refilling.

An under-sink system may make more sense if you want convenient everyday filtration and don’t mind installation.

The Alexapure Pro may be preferable if you rent, want portability or specifically want a filtration system that remains usable without electricity or water pressure.

For another option, see our guide to affordable under-sink water filtration systems.

Alexapure Pro vs. Other Gravity Water Filters

When comparing the Alexapure Pro with other gravity filtration systems, don’t focus only on the appearance of the stainless-steel housing.

The filter element and its verified performance are ultimately more important.

Compare factors such as:

  • Contaminant-specific reduction data
  • Filter capacity
  • Replacement-filter cost
  • Replacement-filter availability
  • System capacity
  • Flow rate
  • Number of filters supported
  • Independent testing or certification
  • Overall system cost

Our gravity water filtration systems guide explains how this type of filtration works and what to compare before buying.

Advantages of the Alexapure Pro

The Alexapure Pro has several practical advantages:

  • No electricity required
  • No permanent plumbing installation
  • Stainless-steel construction
  • Approximately 2.25-gallon chamber capacity
  • Replaceable gravity filter
  • Advertised filter capacity up to approximately 5,000 gallons
  • Can accommodate additional filter elements
  • Useful for everyday filtration and emergency preparedness
  • Larger capacity than most filter pitchers

Potential Drawbacks

There are also limitations worth considering:

  • Gravity filtration is slower than pressurized filtration
  • The system occupies counter or stand space
  • It must be manually refilled
  • Replacement filters create an ongoing cost
  • Broad contaminant claims require careful verification
  • Additional filters increase overall ownership cost
  • It doesn’t provide instant filtered water directly from your faucet

Who Should Consider the Alexapure Pro?

The Alexapure Pro may be a particularly good fit for:

  • Households wanting a high-capacity countertop gravity filter
  • Renters who don’t want permanent plumbing modifications
  • People building an emergency-preparedness water plan
  • Homes that want filtration without electricity
  • People who find traditional water-filter pitchers too small
  • Households wanting a stainless-steel gravity system

Who Should Consider Something Else?

You may prefer another filtration system if:

  • You want filtered water instantly from the faucet
  • You have very limited kitchen space
  • You don’t want to manually refill a filtration system
  • You need whole-house filtration
  • You need water softening
  • You need treatment for a specific contaminant not adequately addressed by the system’s current testing

Alexapure Pro Pros and Cons

Pros

  • Operates without electricity
  • No plumbing modifications required
  • Stainless-steel construction
  • Large capacity compared with pitchers
  • Long advertised filter capacity
  • Expandable filter configuration
  • Useful for emergency preparedness
  • Relatively straightforward maintenance

Cons

  • Slower than pressurized filtration systems
  • Requires dedicated counter or stand space
  • Must be manually refilled
  • Replacement filters add ongoing cost
  • Contaminant-specific performance needs to be verified
  • Not a whole-house filtration system

Frequently Asked Questions

How long does an Alexapure Pro filter last?

A single filter has been marketed with a capacity of up to approximately 5,000 gallons. Actual filter life depends on incoming water quality, usage and maintenance.

Does the Alexapure Pro require electricity?

No. It uses gravity to move water through the filtration element and therefore doesn’t require electricity or batteries.

How much water does the Alexapure Pro hold?

The stainless-steel chambers have an approximate capacity of 2.25 gallons each. The lower chamber stores the filtered water for dispensing.

Can you put multiple filters in the Alexapure Pro?

The system is designed to accommodate additional filter elements, with configurations supporting up to four filters. Additional filters can increase filtration flow but also increase replacement costs.

Does the Alexapure Pro remove fluoride?

Alexapure has published fluoride-reduction claims for its filter. If fluoride is a priority, check the manufacturer’s current contaminant-specific laboratory results rather than assuming a general reduction percentage applies to fluoride.

Does the Alexapure Pro remove lead?

The system has been marketed for lead reduction. For a known lead problem, review the current lead-specific performance data and consider testing your water so you can select treatment appropriate for the concentration present.

Can I use the Alexapure Pro with well water?

That depends on the quality and safety of the well water. Private wells can contain microorganisms, minerals, chemicals and other contaminants that vary by location. Test well water and select treatment based on the actual results rather than assuming one gravity filter can address every potential problem.

Can the Alexapure Pro make stream water safe to drink?

You shouldn’t assume that any unknown stream or surface-water source becomes automatically safe simply because it has passed through a gravity filter. Surface water can contain biological and chemical hazards, and appropriate treatment depends on the source and conditions.

Is the Alexapure Pro better than a water filter pitcher?

It depends on your priorities. The Alexapure Pro offers substantially more capacity and doesn’t require constant pitcher refilling, while pitchers cost less, occupy less space and can usually be stored in a refrigerator.

Final Verdict: Alexapure Pro Review

Our Alexapure Pro review finds that this system makes the most sense for households that specifically want a large-capacity gravity water filter without electricity or permanent plumbing installation.

The stainless-steel construction, approximately 2.25-gallon chamber capacity, expandable filter configuration and long advertised filter capacity make it considerably more capable than a basic water-filter pitcher.

Its limitations shouldn’t be overlooked. Gravity filtration is relatively slow, the system takes up space, and broad claims about contaminant removal should always be checked against current contaminant-specific performance data.

For everyday municipal tap-water filtration, emergency preparedness or households wanting a non-permanent gravity system, the Alexapure Pro deserves consideration.

If you’re dealing with a known contaminant, private well or questionable source water, start with appropriate water testing and make sure the filtration technology you choose is actually designed and tested for the problem you’re trying to solve.

Check Alexapure Pro Price on Amazon


Tags


You may also like